6VDC MOTOR W/ WORM GEAR

6VDC MOTOR W/ WORM GEAR

• 3-6 Vdc • 30.0 x 15.5 x 12.0mm • 1.2mm diameter shaft • Extension with worm gear, 11mm overall • Solder-loop terminals  

7 AMP 3AG FUSE

7 AMP 3AG FUSE

Standard 7 amp fuse. 1/4" x 1 1/4"

7.25" FEMALE TO FEMALE JUMPER WIRES, 40 PIECES

7.25" FEMALE TO FEMALE JUMPER WIRES, 40 PIECES

Inexpensive female to female breadboarding jumpers. 40 color-coded jumpers with plastic shells crimped to each end. Attached in a ribbon cable configuration, they can be left together or stripped apart...

7.25" MALE TO MALE JUMPER WIRES, 40 PIECES

7.25" MALE TO MALE JUMPER WIRES, 40 PIECES

Inexpensive breadboarding jumpers. 40 color-coded jumpers with metal pins in plastic shells crimped to each end. Attached in a ribbon cable configuration, they can be left together or stripped apart...

7.5 OHM 1/4 WATT RESISTOR

7.5 OHM 1/4 WATT RESISTOR

1/4 watt 5% carbon film

7.5A MINI-ATC BLADE FUSE

7.5A MINI-ATC BLADE FUSE

7.5 Amp mini-ATC blade fuse, 11mm wide.

750PF DIP MICA CAP

750PF DIP MICA CAP

7A 12 POSITION TERMINAL BLOCK

7A 12 POSITION TERMINAL BLOCK

For 22-18 wire. 3.78" x 0.67" x 0.57" high. 0.32" (8mm) terminal centers. UL, CSA, VDE. Flexible white (natural) Nylon 66 body, 94V2 rated for 105 C degrees. 400 Volts....

7A GMA FUSE

7A GMA FUSE

3/16" X 3/4" 7 Amp GMA fuse.

7W-2 STRAIN RELIEF

7W-2 STRAIN RELIEF

Heyco# 7W-2. Straight-thru for round cables SJT, S, SO & ST 14/3, 12/3, 18/2, 18/3, 16/2, 16/3. 0.875" diameter mounting hole. Prevents power cords from pulling, pushing, or twisting in...

8 AA CELL BATTERY HOLDER W/ 9V SNAPS

8 AA CELL BATTERY HOLDER W/ 9V SNAPS

Unbreakable plastic holder for eight AA-cell batteries. 9V snaps. 4.77" x 2.28" x 0.65".

8 INCH CABLE TIE

8 INCH CABLE TIE

8" long. Minimum tensil strength = 50 lbs. Color = neutral. Maximum bundle diameter = 1 3/4".